Temperature Probe Properties And Tasks

Does my enclosure support this feature? See Supported Features. Use this window to view information about the enclosure’s temperature probes.

Table 24. Temperature Probe Properties
Property	Definition
Status	These icons represent the severity or health of the storage component. — Normal/OK — Warning/Non-critical — Critical/Failure/Error For more information, see Storage Component Severity. NOTE: On some enclosures, Storage Management may experience a short delay before displaying the current enclosure temperature and temperature probe status. For more information, see Storage Management May Delay Before Updating Temperature Probe Status.
Name	Displays the name of the temperature probe.
State	Displays the status of the temperature probe. Ready—The temperature probe is functioning normally. Degraded—The temperature probe has encountered a failure and is operating in a degraded state. Failed—The temperature probe has encountered a failure and is no longer functioning. Storage Management is unable to communicate with the enclosure using SES commands. The Failed state is displayed when the enclosure does not respond to a status query from Storage Management for any reason. For example, disconnecting the cable causes a Failed state. Minimum Warning Threshold Exceeded—The temperature of the enclosure has dropped below the minimum warning threshold. Maximum Warning Threshold Exceeded—The temperature of the enclosure has exceeded above the maximum warning threshold. Missing — The temperature probe is not present in the enclosure. Inactive — The temperature probe is present in the enclosure, but the EMM that it monitors is not installed.
Reading	Displays the current temperature of the enclosure as reported by the temperature probe.
Warning Threshold	The Minimum and Maximum properties indicate the temperatures currently set for the Warning threshold.
Failure Threshold	The Minimum and Maximum properties indicate the temperatures currently set for the Failure threshold.